Smoking pipe and its types. How to make a smoking pipe with your own hands?

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

It is not exactly known where and when the first smoking pipe appeared. Scientists believe that it was invented by the Indian tribes of Central America, in particular the Mayan tribe. On the sites of their settlements, archaeologists have found ancient pipes depicting various subjects, animals, and people. What do modern smoking pipes look like? What types and types are they? What materials are they made of and is it possible to make a pipe with your own hands? You will learn about all this from this article.

Design of a modern smoking pipe

To begin with, let's look at the design features of the tube. The smoking pipe consists of several parts that have a specific purpose.

The bowl is the rounded part of the pipe filled with tobacco. The size of this part may vary depending on the type of tobacco the pipe is intended for.

The tobacco chamber is a recess in the bowl designed to be filled with tobacco.

Chubuk is the part of the pipe that goes from the bowl to the mouthpiece. There may be several small holes in the chibouk that allow air to pass through. This makes smoking easier.

On the smokechannel smoke flows from the bowl to the mouthpiece. The quality of the smoke channel manufacture largely determines the properties of the smoking pipe.

The mouthpiece is hermetically connected to the stem. It can be straight or curved, with a flat or round flue opening. In some types of pipes, the hole can be divided into two parts, such a mouthpiece will be called a two-channel mouthpiece.

Mouthpiece - the end of the mouthpiece, which is placed in the mouth, between the teeth and lips. Feelings during smoking largely depend on the quality and shape of this part of the pipe. Most often, the mouthpiece has a traditional shape, but in some cases the smoke hole is located at the top of it, so that the smoke rises to the palate without touching the tongue.

The neck connects the mouthpiece to the stem. Made of silver or other materials.

The filter is designed to cool the smoke. It can be made from paper, cardboard, balsa wood, foam. The smoking pipe can be used without a filter. After smoking, the filter must be removed so that the pipe does not deteriorate. Many people shy away from using a filter because they think it takes away some of the flavor of the tobacco.

Now you know what elements the tube consists of. The material from which this accessory is made is also of great importance. Consider what pipes are made of.

Briar

Briar pipes are very popular. Briard is a root thickening of heather. A bowl with a chibouk is machined from it, the mouthpiece is made ofother materials. Briar pipes are durable and do not get hot. They are easy to clean.

They can be of different quality and vary greatly in price. Cheap, low quality briar pipes can be puttyed. Over time, the putty will begin to stand out in color and may fly off.

Tree

Wooden pipes are also quite popular. The tube may be made from a single piece of wood or may be stacked. Only a bowl can be made of wood. For the manufacture of pipes, apple, pear, cherry, beech and precious woods are used. A tree with a pungent odor, resinous, coniferous is not suitable.

Wooden pipes burn out over time and have to be replaced. After use, such a tube requires a long drying time. Products are relatively cheap, except for those made of precious woods.

Corn

Corn tubes are cut from the stalk, which is the core of the corn cob. The tube turns out to be very light, cheap, but short-lived. It is fragile and burns out quickly, so you will need to change it often, perhaps several times a year.

Corn pipe is easy to care for, it filters smoke well and absorbs moisture.

Clay

Clay pipes were once widespread, but today they are most often used as an original gift or souvenir. The pipe can be made entirely of clay or have only a clay bowl.

It is not very convenient to use a clay pipe for its intended purpose, because it is fragile, cracks from dropstemperatures (it can not be smoked in the cold), it gets very hot. But clay pipes decorated with carvings and various ornaments look great as part of the collection.

Foam

Foam is a rare natural material consisting of the smallest compressed shells. The foam is strong and durable. It absorbs moisture well, does not heat up and does not fade, and is easy to clean. The meerschaum pipe is rightfully considered one of the best.

But all these advantages apply only to tubes cut from a single block of foam! If pressed chips are used to make an accessory, then the quality of the product drops significantly, it loses all its advantages and becomes extremely fragile. In order not to purchase such a fake, you need to remember that the meerschaum pipe is expensive and you can not buy it in every store.

Pumpkin

A very rare and valuable material for making a pipe is gourd. The tobacco chamber of such pipes is made of foam or porcelain. But it can be difficult to get a natural pumpkin, most often gourd is imitated using other materials.

Tube Shapes

How do smoking pipes differ in shape? The photos show that there is a great variety in the shapes and types of tubes. The shape and height of the bowl, the bend differ. There are several classifications of smoking pipes, we will consider several basic types.

Types of smoking pipes by shape:

• Billiards is the most common groupforms. Nearly cylindrical shank and bowl. The shank and mouthpiece assembly are a bit like a cue stick, hence the name of the shape.
• Chimney - reminiscent of billiards with a deep tobacco chamber and a high bowl. Such a pipe is intended for an experienced smoker, as it is smoked for several hours and the tobacco may die out.
• Liverpool - billiards with a long shank and a short mouthpiece.
• Lovat - reminiscent of Liverpool with a saddle mouthpiece.
• Canadian - has a long flattened shank with an oval section and a short mouthpiece.
• Bulldog - has a bowl consisting of two cones with a diamond-shaped shank in proportion.
• Dublin is a conical bowl, wide at the top and narrow at the bottom.
• Poker - has a flat bottom, so you can put the tube on the table.
• Sweat - the bowl resembles a pot, the tube is massive, with thick walls.
• Prince - low bowl, curved mouthpiece.
• Apple is a very popular bowl shape.
• Tomato - has an oval bowl.
• Brandy - the bowl repeats the shape of a glass for the drink of the same name.
• Egg - accordingly, the bowl is shaped like an egg.
• Freehands are non-canonical pipes.

How to choose a handset

In a store with a wide range of products, a beginner can simply get confused - such an abundance of sizes, shapes, materials. Is it possible to just buy a tube you like or is it necessary to pay attention to its characteristics? The choice of the first such thing is important, since it depends on it whether you enjoy smoking and whether you become a person,who loves smoking pipes. How to choose a pipe for a beginner? There are a few things to watch out for.

The first thing to decide is the shape of the tube. It is better to choose a simple classic cylindrical shape. The fact is that some pipes require more attention when smoking, they can go out, etc. The product should be pleasant and comfortable in the hand.

The next choice is bent or straight tube. Very often, beginners are attracted to models with a strong bend. But handling such a tube requires some experience. For the first time, straight lines or with a slight bend are best.

One of the most controversial questions is "do I need a filter in the tube?" It somewhat softens and hides the taste of tobacco. Each smoker decides for himself which pipe to choose.

The pipe filter does not affect the quality of smoking, so you can be guided by your own preferences here.

How to make a pipe with your own hands

The smoking pipe is a skillful and elegant item. Only a master can make a good pipe. For the initial processing, tools, a machine tool and a drill are used, and the final refinement is done only by hand. If you want to make a smoking pipe yourself, then you need not only to have the necessary knowledge and be able to work with your hands, but also to have tools. If you want to make a quality thing, then be prepared for the fact that a hand-made smoking pipe will cost more than buyingnew.

The fact is that it consists of rather thin details. The quality of the smoke channel is of great importance. It is quite difficult to cut and process the smoke channel and the tobacco chamber well. But if you still want to make a smoking pipe yourself, you can purchase a special blank, the so-called hobby block. A DIY smoking pipe made from a hobby block requires a minimum of tools.

A hobby block is a piece of wood of a rectangular or cubic shape, in which a tobacco chamber and a smoke channel have already been made. A plastic mouthpiece is already attached to the workpiece. It turns out that all the delicate work that requires special knowledge has already been done, and the owner of the hobby block is left with the most interesting thing - to come up with the shape of a bowl and give these outlines to the workpiece. After cutting out the shape, the bowl needs to be sanded and polished.

The process of working with a hobby block is good because it is interesting, gives room for imagination and, what is very important, in the end you get a really high-quality smoking pipe. The choice of hobby blocks is quite wide, they differ in the shape of the mouthpiece, the diameter and height of the tobacco bowl. With these blanks, you can make good and different smoking pipes at home.