2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21
The rules for lighting industrial premises are slightly different from lighting a residential building. The decisive factor here is not the appearance of the lamps, and not how they fit into the design interior, but the practicality and illumination of the workplace. Lamps PSH-60 are traditionally used to create comfort in workshops and warehouses. There is, perhaps, no more recognizable lamp for industries in the vastness of the Russian Federation than PSH.
And this popularity, despite the constant emergence of new lighting means, does not decrease. The reason for this is the amazing versatility, simplicity of design and at the same time compliance with rather stringent sanitary and fire safety standards. Moreover, the PSH-60 luminaire of eurodesign, which has appeared on sale recently, perfectly copes with the illumination of corridors and stairs of office buildings, without spoiling the appearance of the premises.
Work Light Requirements
Lighting requirementsjobs for different industries vary significantly. Thus, it is impossible to compare the lighting requirements, for example, in a warehouse and in a surgeon's operating room. The illumination of a certain area of the area is usually measured in Lux. For different working conditions and requirements vary:
- Lighting outdoor areas provides intensity from 20 to 50 Lux;
- corridors, passages, other premises not used for any type of work, illuminate 100…200 Lx;
- warehouses, galleries through which goods move, other premises and types of work that do not require special concentration of attention - 200 … 500 Lx;
- premises with the complexity of the work of the middle class - 300 … 750 Lx;
- high class production – 500…1000 Lux;
- if increased requirements are imposed on the work of workers, lighting should be - 750 … 1500 Lx;
- special requirements – 1000…2000 Lux;
- types of special purpose work - more than 2000 Lux.
Benefits of PSH fixture
What characteristics make PSH-60 luminaires so popular?
- Easy design. All components are installed on the basis of infusible plastic using threaded fasteners: an E27 cartridge on a bracket, a block for connecting to power wires, all this is covered with a glass cap (refraction case), which is fixed with ordinary screws.
- Easy assembly, disassembly, repair and connection: almost all work is carried out with a single tool - a flat screwdriver.
- Despite the simplicity of design, PSH-60 luminaires have good protective characteristics: due to good sealing, this lighting device can be used both in rooms with explosive atmospheres and in objects with high humidity, and also outdoors in all weather conditions.
- The absence of any special lighting element (the luminaire is equipped with a universal E27 socket) makes it possible to use both conventional incandescent lamps, energy-saving devices, and very economical LED lamps.
Home use
In everyday life, PSH-60 lamps are used, as a rule, in rural areas for lighting buildings and premises for agricultural purposes or in summer cottage construction. Here is a list of the most common uses:
- sheds and sheds with high combustible load (a broken or exploding light bulb will not cause a fire due to the glass dome);
- baths and other rooms with high humidity (for example, basements and cellars);
- lighting garden paths, parking lots of personal vehicles, other open areas can also be arranged using the PSH-60 lamp (reviews from summer residents are the most flattering).
Varieties
Depending on the purpose of the room, PSH-60 has two main modifications:
- PSKh-60 NBP 01-60 - for agricultural common areas, produced withoutseals and protective mesh;
- PSKh-60M UZ - for rooms with additional requirements for protection and fire safety - has a seal between the diffuser and the body, a metal or plastic mesh, wire entry is made through a rubber or silicone seal.
Recommended:
Lighting lamps: types, characteristics, purpose
The life of a modern person is unthinkable without the use of electricity. To date, the bulk of light sources - electric. About 15% of the total amount of electricity generated is consumed by lighting devices. How to choose the right lighting lamps, what determines their power and energy consumption, how to save money and choose a safe option. That's what this article will be about
DRI lamps - a new word in lighting
For large warehouses and industrial premises, ordinary incandescent bulbs illuminating the apartment, obviously, will not work. For these purposes, DRI lamps were developed and are now actively used. This abbreviation stands for "arc mercury with iodides". More about the principle of operation, types of DRI type lamps later in the article
Do-it-yourself mirror with lighting in the bathroom. Photos of illuminated mirrors
One of the interesting design solutions can be considered an originally designed mirror. Illuminated, with matte patterns and decorative cut-out frames, this accessory is appropriate to insert into any room in the house. However, if we talk not only about the aesthetic qualities of this decor element, but also about the functional ones, then this accessory is needed in the bathroom
How to choose bathroom fixtures
Lamps for the bathroom must be chosen with great care. First of all, you should look at the labeling of the product. From it you can find out how the equipment is suitable for a room with high humidity. And, of course, you should pay attention to the design features of the device and its design
Hookah lighting is a beautiful addition to the ritual
Smoking a hookah is not just inhaling fragrant steam. It's a whole ceremony. Therefore, everything should be beautiful in it. Many lovers of oriental smoking prefer to supply the device with lighting for hookah. What it is and why it is used, we will understand further in the article