Street thermometer: types and installation features

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

With the onset of cold weather, everyone is increasingly looking at their thermometer installed outside the window to find out how to dress when going out today. Often people are faced with the problem of incorrect readings of this device.

This fact takes place due to the fact that when central heating is turned on in apartments, there is a sharp difference between the temperature inside and outside the room. If the difference does not exceed 30 C, then it practically does not affect the readings of the device. This is achieved through the improvement of window structures and the technology of their installation.

But if the difference exceeds 30 C, the thermometer may show incorrectly (usually 5 degrees higher than it actually is). This fact can be explained by the fact that the thermometer is very close to the window.

Nevertheless, the street thermometer does not lie, but gives an error. But even it is relative, because does not converge with the current outdoor temperature, but this is the temperature now in the place where it is installed.

In order to save yourself from the above problem, you need to correctlyinstall a street thermometer. First you need to decide on the type of device that you will install. The old ones were attached to wooden windows with self-tapping screws. Today, plastic windows are installed in almost all houses, which changes the situation.

For such cases, a special outdoor thermometer for plastic windows is on sale. The peculiarity of this device is that in the places where it is attached to the window there is a double-sided adhesive tape, which has good adhesion to plastic. Therefore, once you stick the thermometer, you can use it for many years.

If you have old-style windows and are made of wood, or you are an adherent of clean environmental materials, in this case it will not be difficult to install a street window thermometer. To do this, use self-tapping wood screws of small length. They will firmly and permanently attach a thermometer to the window.

When installing a street thermometer on your window, consider the following feature. In order for it to show the most accurate values possible, it is necessary to place the thermometer in an area that is located away from all kinds of buildings, communications, which in most cases is simply impossible to achieve.

If you want to get more accurate values of the air temperature in the street at the current moment, it would be advisable to install an electronic thermometer. This type of device in its design contains electrical sensors, which are more accurate than conventionalalcohol thermometer. Often, it happens that the scale on a conventional thermometer is located incorrectly, and as a result, the temperature value is too high or too low.

Thus, by installing a street thermometer on your window, you will forever save yourself from looking at weather forecasts for the near future and will find out the temperature on the street exactly in the place where you live, and not the average for the region.