Soda and glue: features of interaction, application
Soda and glue: features of interaction, application

Video: Soda and glue: features of interaction, application

Video: Soda and glue: features of interaction, application
Video: Aquarium Canister Filters Pros and Cons: Are They a Good Fit For You? - YouTube 2024, November
Anonim

Soda and glue can be found in any home. By connecting them together, you can get an unusual effect that allows you to glue plastic products. For experienced housewives, this feature of the components helps to solve minor household problems. And for children, using the same components, you can make an interesting toy.

how to make slime with glue and baking soda
how to make slime with glue and baking soda

Features of component interaction

Soda and glue are primarily used to restore plastic products due to the ability of the mixture to quickly harden. The combination of components allows you to get a durable material that resembles plastic. But you will need for this purpose not ordinary glue, but superglue. And soda should have a uniform consistency, it is better to take a product with the smallest grains.

When the components interact, polymerization occurs, which ensures a strong connection. In the process, the temperature is released, after a few seconds the composition hardens, while it becomes like a hard plastic.

A remedy of these components is used to:

  • restoreparts of broken products;
  • fill cavities (such as cracks and depressions).

How to make plastic repair soda glue: method 1

To repair a damaged area you need:

  1. Degrease the surface of the product with alcohol or vinegar.
  2. Sprinkle baking soda on the broken area.
  3. Smear liquid superglue on top, connect the parts of the product.
  4. Remove the remains of the composition with sandpaper.
  5. Leave the product for two hours so that the mixture is completely frozen.
how to make a slime without glue and soda
how to make a slime without glue and soda

Due to the toxicity of superglue, it is not recommended to use this composition for repairing children's toys, hygiene items. In addition, it is necessary to carry out the procedure in a room that is well ventilated, since the interaction of the components may release gas.

Method 2

You can use another option to fix a broken item:

  1. After degreasing, apply a small amount of superglue to both parts of the broken item.
  2. Connect the parts together.
  3. Sprinkle baking soda on top.
  4. Fix the product for a few seconds.

If necessary, the procedure can be repeated.

Filling cavities with compound

If cracks, notches and indentations appear on a plastic product, glue and soda will also come to the rescue.

To restore the surface you need:

  1. Pour a small amount of baking soda into the indentation.
  2. Pour glue.
  3. Stir composition andleave for a quarter of an hour.
  4. Clean and polish the surface.

DIY toy

Such a popular toy as a slime can be bought, but it is much nicer and more interesting to make it yourself in any color. It is soft to the touch, stretches, can stick to various surfaces. In this case, it is necessary to use PVA glue.

Need to take:

  • half a cup of baking soda;
  • 100ml glue;
  • 50ml water;
  • any dye.
soda and glue
soda and glue

How to make a slime with glue and soda:

  1. Glue mixed with water (15 ml).
  2. Add dye, mix thoroughly.
  3. Dilute the soda with the remaining amount of water to the state of gruel, combine with the glue mass.
  4. Knead until smooth.

To store a toy made of soda and glue, it is better to use a glass jar. Unfortunately, such a product is short-lived, after a few days it will dry out, but in this case, you can make a new slime.

How to make a slime without glue and soda

You can use other components to make a bright toy. You can choose any recipe, depending on the ingredients available in the house.

For example, you can take:

  • plasticine;
  • soda;
  • gelatin.

Cooking method:

  1. Pour gelatin with water in a metal bowl and leave for an hour.
  2. Put on the fire and bring to a boil, then immediately remove from the stove.
  3. Knead well 100 g of plasticine, combine it withwarm water (50 ml).
  4. Add gelatin, stir.

Such a product will be more durable than a slime made of glue and soda.

Glue and slime shampoo

This method is the easiest. To make a toy, you need to pour three parts of glue and two parts of shampoo into a cellophane bag. Thoroughly mix the composition until the mass thickens.

how to make baking soda glue
how to make baking soda glue

Tetraborate slime

Prepared in the same way as slime from soda and glue, but in this case, soda is replaced with tetraborate.

Need to take:

  • water;
  • glue;
  • tetraborate (sold in every pharmacy);
  • food coloring.

Cooking method:

  1. Combine equal parts of glue and water.
  2. Add any dye. Mix thoroughly.
  3. Pour tetraborate in small parts until the product has the desired density.

Shaving foam and glue

To make a toy, combine four parts of glue, one part of shaving foam and liquid soap. Add tetraborate, food coloring to the composition.

You can do without tetraborate, but you have to knead the product for a long time, for half an hour.

baking soda and glue slime
baking soda and glue slime

Silicate glue slime

Silicate glue can also be used in the preparation of slime. Such a toy will be elastic, dense and will be able to bounce off hard surfaces.

Required:

  1. Pour glue into a container, add dye.
  2. Stirring, add alcohol untilmass thickening.
  3. Leave for 20 minutes.
  4. Knead well with hands.

Starch toy

Cooked slime according to this recipe will also be hard and elastic.

You will need:

  • starch - 100 g;
  • hot water - 200 ml;
  • PVA glue - 100 ml;
  • dye;
  • hydrogen peroxide.

Cooking:

  1. Starch is mixed with water until a jelly-like mass is obtained.
  2. Cool and add glue.
  3. Add dye and peroxide (a few drops).
  4. Knead well.

Safe Flour Slime

This toy can be prepared for the smallest children who like to put everything in their mouths. It is safe and does not contain chemicals, unlike a product made from soda and glue.

Need to take:

  • 400 g flour;
  • 50 ml each of cold and hot water;
  • food coloring.

Cooking:

  1. Flour should be sift and combined with dye.
  2. Pour in cold water, stir.
  3. Add hot water, and mix thoroughly again until a smooth dough without lumps is obtained.
  4. Put in fridge.
slime made of glue and soda
slime made of glue and soda

How to store and care

Slime made by hand is very capricious and short-lived. To prolong its service life, it is worth remembering a few recommendations:

  1. To store the product, use a tightly closed plastic container.
  2. Keep the toy away fromsources of heat, the sun, so that it does not dry out.
  3. If the product is too soft, you can put it in a container with a little s alt and close tightly. S alt is able to draw out excess liquid, this will restore elasticity to the slime.
  4. A toy that is too hard can be softened with a few drops of water added to the storage container.
  5. It is necessary to avoid contact with pile surfaces, this will make the toy unusable.

Glue and baking soda are not only good helpers in everyday life, helping to repair plastic items, but also tools with which you can make an exciting toy. Such a product develops fine motor skills, soothes, relieves stress. In addition, it can be used to clean the keyboard and clothes.

Recommended: