First start washing machine: tips and tricks

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

The new washing machine has been delivered, unpacked, installed in its workplace and connected to the water supply. So you want to launch it as soon as possible and see it in operation? Experts recommend not to rush, since its performance and durability depend on the first inclusion and starting washing. The haste and wrong actions of the newly minted owner can not only harm, but even disable an expensive unit. The first start-up of the washing machine must be carried out in accordance with the manufacturer's recommendations. Therefore, it is important to carefully read the enclosed instructions.

Preparing the washing machine

Before the first start, a complete installation of the equipment must be carried out: the water supply and sewage hoses are connected, the device is leveled, the transport bolts that hold the drum are removedduring loading and transportation.

Before the first use, it is worth checking the readiness. It will not take much time, but it will protect the owner from surprises that may arise if something was missed in a hurry.

Check readiness

Before turning on and starting the washing machine for the first time, it is recommended:

• Carefully read the instruction manual. In this case, special attention should be paid to the washing mode control section. Incorrect user management may affect the performance of the electronic unit of the device.
• Check the connection of the machine's hoses: rubber for water supply (bulk) and corrugated for draining into the sewer (drain). It is better to fix the corrugated hose, because if the water is actively drained from the washing machine, it can fall out and cause a flood.
• Check the rear wall of the machine for shipping bolts. They fasten the internal parts of the machine and the drum for safety during tilting and transportation. If the bolts are in place, they must be removed and the holes closed with rubber covers, which are usually included with the machine. In most cases, the manufacturer provides 4 shipping bolts.
• Open the water stop valve on the inlet hose.
• Check if the front, back and side walls of the machine have removed the remains of the adhesive tape that fixes the parts.
• Open and inspect the drum of the washing machine for debris or any parts.

This is mandatorysteps to take before using the washing machine for the first time.

First wash

Manufacturers of washing machines and experts recommend wasting the first wash - without laying the linen and staying near the machine all the time.

Instructions for launching the startup run:

• Turn on the power supply of the device.
• Close the loading door until it clicks.
• Into the powder and conditioner compartment, add a special detergent for the washing machine for the first run or regular powder.
• On the control panel, select the "Cotton 60 °" mode, start it and wait for the wash to finish.
• Listen to the noise of the machine during operation, its measured buzz and whether there are any grinding or knocking sounds.
• When touching the working device, vibration, shaking should not be felt (if the level is correctly set, even on the spin cycle, the machine should not move).
• Inspect the machine after completing the first wash. Sewer and water hoses should be checked for leaks or water leaks under and around the machine.

What to pay special attention to?

The first launch of LG, Bosch, Candy, Indesit, Hotpoint Ariston, Samsung, Haier, Vestel, Beko washing machines and devices from other manufacturers is almost the same.

In all cases of violation of the normal mode of operation and washing, you should call a specialistor look for the cause of the malfunction yourself.

If the first time you start the washing machine, the user finds a knock, rattle or other strange sounds, without delay, it is worth calling a specialist from a repair shop or service center. Do not erase until the problem is fixed, even if the problem does not seem serious.

Recommendations for the first wash without linen are based on the fact that most of the surfaces of the drum and drains are most often contaminated with technical fluids and oils, the application of which is necessary during assembly at the factory. In addition, these same parts can retain unpleasant odors for a long time. The main thing, with such a blank wash, is to check whether the parts and parts of the new machine are working properly, whether the water supply and drain system are tight.

First wash products

Specialized appliance stores offer an inexpensive tool for the first start of the washing machine. It contains active surface substances that destroy all technical odors, dirt and impurities. After using such a product, a pleasant smell remains in the drum of the washing machine for a long time. This product is added during the first wash in the powder container.

Tips for proper washing

In order for the washing machine to serve for a long time, you need to listen to simple tips:

• do not overload the machine with excess laundry;
• separate whites from coloreds and notwash them together;
• check the pockets of loaded items, especially for metal objects;
• to soften water, use water softeners, conditioners when washing;
• clean the drain hose filter of small debris;
• wipe the panel of the machine, the drum door with special substances that do not contain chlorine and abrasives.

Recommendations for the first launch of the Bosch, Candy, LG, Indesit, Hotpoint Ariston, Samsung, Haier, Vestel, Beko and other washing machines, as well as their further operation, are practically the same. Following these simple guidelines will help keep your appliances durable without repairs.