How to make a bridal bouquet with your own hands? Manufacturing ideas

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

Even in ancient Greece, during the marriage ceremony, the bride walked down the aisle, carrying in her hands the branches of flowering ivy and orange tree. It was believed that such plants are symbols of eternal love, family happiness and we alth. In ancient Egypt, by analogy, the bride was given sprigs of rosemary and garlic.

This bouquet also symbolized prosperity in the family, love and understanding. Modern newlyweds are not limited by prejudices from the past. Therefore, they can go to the altar with any bouquet of the bride. Doing this with your own hands is not difficult. Here are step-by-step instructions for creating your own wedding bouquets.

What materials and tools do you need?

Before you make a bridal bouquet with your own hands, you need to think over the concept of the futureproducts. Moreover, you need to prepare the materials and tools that you may need. Suppose your bouquet will be made from real white flowers.

To do this, take: 3-4 large chrysanthemums, 6-7 medium-sized hydrangeas (do not forget that there should not be an even number of flowers in total), a package of real twine, a coil of brown wire, buttons for the office, garden pruner and brown organza with a width of at least 5 cm.

We form the basic blank for the bouquet

So, when all the tools and materials are prepared, you can proceed to the very process of creating a bridal bouquet with your own hands. To get started, take all the flowers prepared for work and carefully cut off all the leaves with a pruner or scissors. Next, take three hydrangea flowers and connect them together so that the flowers form a small triangle.

Connect flowers into triangles

Add three more light hydrangeas to the received three flowers. Add them along the edges of the resulting triangle. In the center there should be a place for the last hydrangea. At the same time, it is recommended to lay it slightly above the level of all other flower heads.

Thus, you will give a rounded shape to your future bridal bouquet of flowers. With your hands, free up some space in the center and insert three white chrysanthemums into it. You should end up with a kind of open triangle.

Fix flowerswith legs with improvised means

After all the flowers are in place, fix them with floral wire. At the same time, for reliable fixation, it is best to fix the wire at the top and bottom of the bouquet.

Trim the extra ends of the stems with scissors or secateurs. Then wrap them with organza ribbon. Fix its ends with buttons. Loosely wind the twine over the ribbon.

At the end, fix the pieces of twine with the rest of the bending floral wire. It turned out pretty cute and neat bridal bouquet. It is not difficult to make it with your own hands. The main thing is to stick to the above work plan.

Three options for bouquets of natural flowers

Creating bouquets of fresh flowers is a classic of the genre. True, there are several options that allow you to create the most beautiful and unusual bouquet. For example, you can use our previous tip and make flowers on stems. It is noteworthy that after wrapping the legs of the plant with decorative tape, the flowers themselves can be supplemented with a variety of beads, rhinestones and even sparkles.

Alternatively, you can make a bridal bouquet with your own hands from natural flowers using wire. This product is created by analogy with a bouquet on stems. However, for greater reliability, a wire is inserted into each of the flower stems. So you can more securely fix all the flowers. A decorative tape is wound over the stems, fixed with stationerybuttons.

And finally, the longest-playing option is considered to be a bouquet using a porta bouquet. This product is a special ball of foam rubber attached to a plastic frame. It is in this ball that fresh flowers on small legs are inserted.

And for further preservation of the freshness of flowers, this roller is recommended to be properly soaked with water. In conclusion, this product is carefully decorated with satin and other ribbons in order to hide the secret substrate for fresh flowers. This is how the bridal bouquet is made with your own hands. Step-by-step execution of all actions is a guarantee of the quality of work. Connecting imagination, you can get an unusually beautiful bouquet that can easily complement the image of any bride.

Bride's bouquet of satin ribbons with your own hands

Real flowers are, of course, beautiful, but impractical and short-lived. Therefore, many newlyweds prefer to create several wedding bouquets, of which one is the main one, and the second is an understudy.

It is noteworthy that the first can be made from beautiful, but short-lived living plants, and the second - from any decorative materials. For example, a bridal bouquet made of ribbons is very popular. Doing it with your own hands or is it better to order ready-made, a moot point. But if you want to do everything yourself for your wedding, then it's time to do needlework.

Create a bouquet of beautiful satin ribbons

So, we make a product for a wedding from satin ribbons. It is not very difficult to create a bridal bouquet with your own hands. Another thing is that for work you will need the following materialsand tools:

• 14-15 meters of white or pink ribbons with a width of at least 50 mm.
• 1-2 meters of white lace.
• 5-8 plastic beads, rhinestones or imitation pearls.
• A foam or foam ball.
• 5-6 thin pieces of wire with white pearls at the end (these are future stamens).
• Glue.
• Clippers or scissors.
• Floral ribbon and wire.
• Olong wooden sticks.

Take about 10-12 wooden sticks. Stack them tightly with each other. Secure top and bottom with wire. Connect the resulting beam with a hemisphere or soft ball. Slightly push and deepen the sticks into the sphere. Fill the resulting hole with glue.

Wait for it to dry. Disguise the joint with a rounded lace shape. Make it a kind of underlayment. Glue the sticks well. Cover them up with tape. Carefully wrap its ends according to the type of paper in envelopes and glue.

Make flowers from satin ribbons

When the flower frame is ready, you can start making the flowers themselves. The easiest way is to make roses of different shapes. To do this, take the wire. Wrap a ribbon over it. Get a kind of knob. Fix it with wire or thread (it's better to tighten the tape).

Cut off excess parts. Adjust the length of the wire and insert the finished rosette into the previously prepared sphere or semicircle. There can be many such roses. If desired, they can not be strung on a wire, but cut at the rootand stick to the sphere. At the same time, glue the roses in a circle. At the end, you can glue beads, rhinestones in their middle, decorate with artificial pearls.

Now you know how to make your own bridal bouquet using glue and satin ribbons.

How to make an original bouquet brooch?

Another original product that you can make with your own hands for a wedding is a bouquet brooch. To do this, you will need materials and tools such as pliers, floristry wire, 70-80 versatile brooches or buttons, a glue gun, a few artificial flowers, special green or brown tape (teip tape), some safety pins and 50 cm of light satin ribbon.

Before starting work, all brooches and buttons must be washed in soapy water and dried thoroughly. We attach each brooch or button to a wire and decorate with a floral ribbon. We take artificial flowers and divide them into separate petals. Then, using a glue gun, we attach two such petals to each resulting stem at once.

Take five newly formed flowers from buttons or brooches and fix them in a kind of bunch with floral tape. Do the same with the rest of the flowers. And only after the wedding bouquet is ready, it remains only to carefully trim the stems of the product. Do not forget that it should have a rounded shape. At the end of the work, wrap the stems with a satin ribbon. Secure the ends with glue or pushpins.

How to make a bouquet of artificialflowers?

A bouquet of fake flowers is created by analogy with a product made from living plants. At the same time, finding artificial flowers is not at all difficult. They are almost everywhere. For work, you can also take as a basis a frame with a sphere or a semicircle made of foam. Or just collect the finished flowers in a bouquet and fix with wire for strength and a beautiful satin ribbon for a greater visual effect.

Amazing bouquet of beads and beads

The bouquet looks quite unusual with the addition of various beads, jewelry details, artificial pearls. To create the appropriate effect, use a foam blank. It can be painted green or pink, which will visually increase the density of your bouquet. Next, alternately stick beads, beads, buttons and whatever you like. Finally decorate with ribbons and top with glitter or gold paint.

What other materials can be used to make a bouquet?

In addition to the above materials, a bouquet for a wedding can be made from polymer clay. According to the masters in this field, such plants look extremely realistic. However, due to the certain gravity that they endow with the product, this bouquet should not be thrown into the crowd. To do this, you need to prepare a second spare bouquet made from real plants.

In addition, an essential attribute for a wedding can be made from colored paper, napkins, corrugated paper, cardboard, origami material. Kanzashi flowers look pretty, made from rich red velvet fabric. They can be of different sizes, due to whichlook very elegant and impressive. In a word, there are a huge number of options to help create an exclusive bouquet for a wedding.