DIY bird feeder from a bottle: interesting ideas and recommendations

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

Thinking about how to instill in children love for our smaller brothers? Make bird feeders together. It is very easy to make such crafts with your own hands, and how much joy a child will experience when he sees how the birds feed daily from his creation! Look for ideas for such useful and simple crafts below.

Feeder from bottle and glass

Yes, this topic is not very childish. But the feeder looks spectacular. If you have a private house, you can hang this craft in the garden. But hanging such decor around the city is not worth it. How to make a similar bird feeder with your own hands? You will need an empty bottle and glass. We will fasten all this with a thick wire. You can peel the label off the bottle, or you don't have to worry about it. Let's get started. You should take a thick wire and wrap it around the bottle. Now you need to fill the vessel with seeds or special bird food. We fill the glass. We lower the neck of the bottle insideglasses and fix them in this position. How to do this, you can see in the picture above. Now a hook should be made on the wire on the opposite side of the glass. It is for him that the structure will be attached to the tree. As you can see, making an original bird feeder with your own hands is not so difficult. It remains to find a suitable place for her.

Colored feeder

But with the manufacture of this craft, a child can help you. How to make a bird feeder with your own hands? You should find a suitable plastic bottle. It is advisable to use a container of 1, 5 or 2 liters. From a bottle of half a liter, feeders are too small. Birds will be uncomfortable in them. Let's start manufacturing. The bottle must be cut into three parts. We need top and bottom. They need to be decorated. Since the feeder will hang on the street, you need to paint it with acrylic. However, do not paint the inside of the feeder. Chemical paint is toxic, and not only people, but also birds should not eat it. You can make the bottom part plain, and draw flowers or a geometric ornament on the top. Now you should cut through the door in the feeder. Cut out a rectangular hole at the bottom. It remains to glue the top and bottom. We glue the parts to each other. To make the product easy to hang on a branch, you should attach a loop to it. We remove the cover, make two holes in it, pass the rope through them. We tie it in a knot and twist the lid.

Milk bottle feeder

Such a productlooks nontrivial. To make the feeder look interesting, you have to work hard and go shopping. Standard milk cans have a boring shape. Try to find something similar to the image posted above. How to make a bird feeder with your own hands? We wash a suitable jar and mark it. The lower part should be at least 6-7 cm. We retreat this distance and cut out three rectangular holes 13-15 cm high. Between the rectangles you need to leave three strips 3 cm thick. If you want, you can cut a few more decorative holes just below the cover. We attach a thread to the feeder. With the help of an awl, we make two holes in the lid and pierce them with a thread. We tighten the loop into a knot and twist the cap onto the bottle.

Feeder with wooden base

This craft can be done by dad and son. Moreover, the boy must be older than 8-9 years. It is at this age that you can give your child the first lessons in carpentry. How to make a bird feeder with your own hands? From a bottle and wooden ribs you need to assemble a house with a core. Let's start by making the base. We collect two small boxes: one is short, the other is long. We fasten them at a right angle. Now we make a roof from two square blanks. Finding the right bottle. You can use a plastic container, but glass will look prettier. We drill two holes in the wall of the feeder, thread a thread through them and attach a bottle to this loop, which must first be filled with seeds. Tie a rope toback wall of the feeder. Such a bird house can be placed on a horizontal surface or hung on a thick tree branch.

Bottle and spoons

This feeder is simply brilliant. You can assemble it in just 15 minutes, but it looks impressive and, most importantly, performs its intended purpose well. Making a similar bird feeder from a bottle with your own hands is very simple. On different sides of the container we outline two or three points. They should be located at an equal distance from each other vertically. We cut or drill the bottle through. We insert ordinary, rather flat wooden spoons into the holes. Now we fill the bottle with food. It can be millet, seeds, pearl barley or any other cereal. We twist the lid and tie it two or three times with a tight rope. The feeder is ready. We hang it on a tree and rejoice that the birds will be fed thanks to you.

Feeder out of the box

This craft must have been done by everyone, if not in kindergarten, then at school. And the path is far from a new idea, but even a child can build a bird feeder according to such a scheme with his own hands. You need to take a cardboard box from under milk, kefir or yogurt and cut a hole in it. But there are several nuances. A hole should be cut with an indent from the edge of at least 6 cm, otherwise it will be difficult to pour food inside. The hole should be placed on one side. This is done so that the bird does not spill food when eating.

Also, if speakingis about raising a child, we should not forget about aesthetics. Do you think a feeder just cut out of the box is very good? With your own hands for birds, meanwhile, you can make a real house - bright and original. You can break small sticks and decorate the roof with them. And decorate the walls with different colors. You also need to pierce the bottom of the feeder with one of the branches. This should be done in order to make it comfortable for the birds to sit on your feeder. You should also glue some kind of load to the bottom of the craft. If it is too light, the seeds will fall apart all the time because the box is swaying too much in the wind.

Simple feeder

This craft is made from a five-liter bottle. But you can take a smaller container. How to make a feeder? We cut the bottle into two parts. In the middle we insert an iron grid. It should be small enough so that the seeds do not spill out, but not so small that the bird cannot take out the food. Now you should cut out square "windows" on both sides of the bottle. One should be located on the top of the container, and the second on the bottom. Now we glue the bottle and fill it with seeds. Hang the feeder by a rope or wire that can pierce the neck of the product.

Original feeder

Another pretty original bird feeder idea. You can make it with your own hands in just half an hour, and even a child can cope with the work. For the manufacture you will need three identical bottles. Two of them havecut off the tops. Next, you should form spatulas or scoops from these blanks. Now we take the base bottle. In its lower part we cut two holes on both sides. Their diameter should be equal to the neck of the bottle. Now we insert the spatulas into the base and fix them. This can be done either with adhesive tape or with superglue. We fill the feeder with seeds and place it on any horizontal surface. Hanging the product is not worth it, as it keeps the balance rather poorly.

The easiest bottle feeder

This is the easiest way to make crafts. Do-it-yourself bird feeder from improvised means is done in just 10 minutes. A bottle of 1.5 liters is placed on the table and marked. You should draw a rectangle that does not reach the top and bottom of the container by 6 cm. The geometric figure divides the bottle exactly in half horizontally. Cut out a hole. In principle, the upper part can be cut off altogether. But then the feeder will fluctuate strongly in the wind due to the lack of stiffeners. Therefore, we tie the rope to the lid and hang the product on a branch. You can decorate the craft by painting the outside with acrylic paints.

Doing with kids

This product looks very elegant. How to make a bird feeder with your own hands? The plastic bottle is cut into three parts. We only need the top one. We take a pallet from a plastic pot. These will be the two main parts of the feeder. We paint the blanks with acrylic paint. Youyou can draw flowers, patterns or an ornament. Now we pierce the top of the bottle from three edges and thread the threads there. We string beads on them and with the help of hooks we connect the structure with the pallet. It turns out a cute feeder. Now you need to insert a hook into the lid or loop the rope through.

Feeder "Owl"

This craft looks original, despite the fact that it is done very simply. A do-it-yourself bird feeder from boxes is made in an hour. We buy a cardboard box. It doesn't matter what it's from. You can take a container of milk or yogurt. The main thing is to wash it well. Now you need to make a hole. It should be in the shape of an arch and be located 6 cm from the bottom of the box. On both sides of the main "entrance" you need to make two additional ones. Only this time we do not cut off the rectangles completely, but leave them attached to one side of the feeder (see photo above). We form wings from the side "ears". It remains to decorate the feeder. Draw feathers, beak and eyes with a black marker. We insert a thick thread into the upper part and hang the product on a branch for it. Don't forget to feed.

Feeder "House"

This craft is not the work of a child, but of an adult. It looks very original, but it is done quite simply. You should find a thick cardboard box and paint it white. Now we cut through the windows in the workpiece. They can be of different shapes and sizes. Cut off the bottompart of the box and glue the transparent plastic lining from the inside. Now you need to make a box-pallet. You can make it yourself from thick cardboard or use a ready-made lid. We pierce two parts of the product in the middle with a thick wire. She will act as a holder. We pour seeds into the blank-house, turn it over and hang it by the wire to the branch.