Protective film for car. Wrapping a car with a protective film
Protective film for car. Wrapping a car with a protective film

Video: Protective film for car. Wrapping a car with a protective film

Video: Protective film for car. Wrapping a car with a protective film
Video: Pregnancy Week 30 | What to Expect in Your Third Trimester - YouTube 2024, April
Anonim

Scratches and chips on body parts have become commonplace throughout the life of a car. The fenders, hood and bumper related to the front of the vehicle suffer the most here. It is in order to protect them from damage in the first place that a protective film is installed on the car. Anti-gravel clearcoat can be cast vinyl (PVC) or polyurethane, and can vary in thickness from 100 to 200 microns. Each of these materials has both pluses and minuses.

protective film for car
protective film for car

Features of vinyl material

The service life of PVC film is about 8 years. Its peculiarity lies in the fact that it can paste over details of any complexity, even as a whole. Such a transparent protective film will perfectly fit on the thresholds of the car. Its thickness is 100 microns. Despite its small thickness, it stretches perfectly and perfectly protects the car body from reagents and mechanical damage. It is applicable mainly for the urban environment and for long-term both partial and complex pasting.

Features of polyurethanefilm

Polyurethane material of this kind is stronger and thicker than vinyl, but also surpasses the latter in price. Its service life is 4-5, sometimes 7 years. Its thickness is 100-250 microns. Such a protective film on a car is valued due to its good elastic qualities and thickness, which makes it possible to best protect the body of the "iron horse" from damage. Of course, due to the special composition and high density, the film cannot be used on complex geometric surfaces. It also does not paste over the entire car.

Often used this kind of protective film on the headlights of the car, which is one of its most vulnerable spots. Before applying to the working surface, according to a specially prepared contour-template, the required amount of material is cut out by the plotter, and only then it is applied to the parts and sections of the unit. Most often, the film is used under the existing intense mechanical stress.

car protective film
car protective film

Protective film on the car will protect the body from chips

Anti-gravel film material makes it possible to keep the paintwork of the car in good condition, so that in the future there will be no need for its restoration, which will significantly save money. In addition, it is quickly and easily dismantled without leaving any traces.

The service of car body protection with a protective film is especially popular with owners of new vehicles who are eager to keep the perfect factory paint job as long as possible. Installation of anti-gravel materialproduced in a very short time, sometimes just a few hours is enough. Professionals will process fenders, bumper, hood, pillar and even mirrors with high quality.

protective film for car headlights
protective film for car headlights

Why do I need to wrap a car with a protective film?

Thanks to modern material application techniques, the task of 100% vehicle coverage has become feasible. This technology is resorted to if you need to pay attention to especially often vulnerable places of the unit. Increasingly, a polyurethane or vinyl protective film on a car is used to prevent chips on the body of a vehicle unit. The properties of the materials are ideally suited to be used for installation on devices that operate even in special weather conditions.

The hood most often suffers from chips. Its front part is damaged by small stones rapidly falling into it while driving, which fly out from under the wheels of oncoming cars. Therefore, experts recommend first of all taking care of protecting the paintwork of this part. It is best to paste over it completely, but if there is a desire to save money, then it will be enough to process only the front part, somewhere 50-60 cm.

General information

The thickness of the body film material is 100-150 microns, which corresponds to 0.1mm. After a complex of works on lamination, it is completely invisible at a distance of 1-2 meters. A protected vehicle is no different from a traditional one.

protective film for car sills
protective film for car sills

Area of film application

All types of anti-gravel films have a special special adhesive composition. It is designed to cover parts that have a glossy surface, slightly rough or slightly matte. It is important to know that the adhesive composition of the material is rather weak, and sometimes its thickness may not be enough to penetrate the rough layers of the matte surface. That is why the adhesion characteristics here are minimal when compared with a glossy material. It is best to entrust the car with a protective film of any kind to professionals.

Lifetime

Protective transparent film material from the moment of installation will last an average of 5-7 years. It is advisable to install it immediately after purchasing a new transport unit or a used one, but with a paintwork that is in good condition. There is no point in delaying this decision. If the installation of a material such as a protective film on a car is delayed, then there is a risk of getting many microcracks on the car body.

car protective film
car protective film

Benefits of using screen protector

The use of film material is possible on any transport part - threshold, headlight, hood, wheel arches, wings and other elements. More difficult is pasting the car with a protective film on the bumper section due to the presence of many hemispherical parts and bends. But this difficulty can be overcome, the material stretches well and makes it possible to process even the most difficult parts of the unit without seams.

Currently, many motorists install special protective deflectors on the hood from gravel damage, popularly referred to as a "fly swatter". But if the installation of the film material is completed, then there is no need for additional protection. Over time, the clear vinyl or polyurethane coating comes off easily and leaves no residue. Other benefits include chemical resistance, UV protection and water repellency.

Recommended: