How to connect the dishwasher correctly

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

This article will answer the question of how to connect a dishwasher. When it is built into the working kitchen area, sewerage, power supply and water are brought directly to it. But if the appliances were purchased separately, then you will have to rack your brains over how to connect the dishwasher.

First of all, for this element of household appliances, you need to find a suitable place. In order to avoid excessive load on the pump and not to lengthen the sewer hose, it is advisable to place the machine closer to the sewer. It is possible to extend water and electricity without any consequences.

How to connect a dishwasher to water

In most modern houses, the plumbing is made of metal-plastic or just plastic. It's not that hard to get into it. The main thing is to turn off the main water supply faucet to the house before installing the dishwasher. Choose a place closer to the device and install a tee, after which the tap will go. itwill help to quickly shut off the water in the event of a breakdown. In addition, the inlet valve located inside the dishwasher may fail, then the apartment is threatened with a flood. It is worth paying attention to the fact that modern representatives of such household appliances are equipped with flood protection, and it is called differently by each company. This parameter should be taken into account when buying.

If your house has an iron plumbing, it is recommended to install a coarse water filter in front of the machine, because the mechanism of this technique can fail due to rust. If the length of the hose is not enough to the tap, it must be replaced with a longer one. This option, though not very cheap, but reliable. A more economical solution would be to purchase extension cords.

How to connect a dishwasher to the sewer

Wastewater is removed through a flexible hose, which can be extended if there is not enough length. The main thing here is not to overdo it. The hose can be extended no more than 2 times to avoid a strong load on the pump. Another option would be to connect the pipe itself to the machine. It is also possible to connect a dishwasher drain to the siphon of the kitchen sink, if it has a drain for this purpose. To prevent dirty water from pouring back into the machine, it is necessary to lift the hose just above the siphon, making a horizontal bend.

How to connect the dishwasher to electricity

For this, it is recommended to make an individual socket withmachine, which will go directly from the counter. The socket must be grounded, and the cable must have a cross section of at least 2.5 squares or with three cores. This is done taking into account the fact that the dishwasher has a large capacity. It is necessary to open the meter and find the phase of the main cable to the flat and zero using an indicator screwdriver. After that, an automatic machine is connected to it, it is displayed in the kitchen. After it, the socket itself already follows. After finishing washing dishes, turn off the machine, and only then take it out.

And the most important thing when installing a dishwasher is to level it. There are two main ways. If you plan to hide the equipment under a desktop or in a cabinet, then the level can be set by trial, determining the degree of vibration during operation of the machine. Another method involves screwing the legs all the way and creating a platform for the household appliance clearly in level.

Before starting work, do not forget to read the instructions for the device. Good luck!