How to stick a background on an aquarium: instructions, tips and photos

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

There are situations when a person has carefully thought out the design of the aquarium, but it still looks unfinished. Perhaps one of the main details is missing - this is the background. It is not easy to perform it harmoniously and not standardly. Next, we will tell you how to glue the background on the aquarium and how it can be.

What is it and why is it needed?

Note that the most important element of aqua design is the background. Its main task is to hide the excess (wires, equipment, etc.) from view. The background is hardly noticeable, but it makes it possible to diversify the composition inside the reservoir.

Varieties of the background

There are two kinds of background:

1. Internal. He looks more natural. But when installing it, there are nuances. They are worth considering. Note that all materials used must be non-toxic. Also, they should not affect the chemical composition of water. In this case, the background must be installed before pouring liquid into the aquarium. AtIn this case, the film must be very firmly glued to the glass in order to avoid its falling or penetration into it by the inhabitants.
2. External. The main advantages are availability and low price. Also, the algae does not worsen the external background.

Film photophone. Its features and benefits

How to glue the background on the aquarium? Before answering this question, you need to consider the products that are currently on sale. Then it will be clearer how to fix it. The first type is a film photophone. It happens in one color, as well as with different images (view of the seabed, landscapes, etc.).

This design has its advantages. These include:

• easy to install;
• great variety of backgrounds;
• low price;
• easy to dismantle.

You can stick it with glycerin and soapy water. Next, consider all possible ways.

With soap solution

How to glue the background on the aquarium with soapy water? Take the tape first. It should be slightly smaller than glass. Then the background will not disappear from it. After that, you need to wipe the aquarium glass, spray the solution. Next, spread the film over the surface of the wall, gently squeezing out the water. Here's how to glue the background on the aquarium without bubbles quickly and easily.

With Glycerine

For this procedure you will need:

• adhesive tape;
• 25ml glycerin;
• background roll (suitablecolors);
• sponge;
• glass cleaner.

And how to glue the background on the aquarium with glycerin? The first step is to prepare the film to fit the glass. Moreover, the background should turn out to be 1 centimeter smaller than it on all sides. Then carefully wipe the wall of the aquarium from dirt. This should be done with a sponge that has been dipped in glass cleaner.

What to do next? How to glue the background on the back wall of the aquarium? Then, using a special spatula, evenly distribute glycerin over the glass, which can be purchased at any pharmacy. Apply the background, smooth it so as to squeeze out all the air bubbles from under it. If this is not done, then the whole design will deteriorate. When you squeeze out the air, you can use a spatula wrapped in a rag. Also, an ordinary flat piece of cardboard is suitable for these purposes.

If during the process of attaching the background film will twist on the corners, then temporarily fix them with tape. Wipe the squeezed out glycerin from the edges with a sponge. Then, for greater reliability, glue the background around the perimeter with adhesive tape. Now the aquarium looks much more beautiful.

With glue

This method is also not difficult: everything is done in exactly the same way as in the cases described above.

For this you will need:

• photo composition;
• JBL Fixol glue packaging;
• glass cleaner;
• adhesive tape;
• sponges.

Next, we will tell you how to glue the background on the aquarium. Thoroughly clean the rear firstglass from dust, dirt. Do the procedure with a sponge and cleaning agent. Next, let the glass dry and apply special glue. It should be distributed strictly over the entire surface of the rear window. Don't forget the corners. Indeed, during operation, the film in these places can quickly peel off and deform.

Then take the background, attach it to the back wall. Smooth the surface with quick movements. Don't worry if it happens that the background doesn't lay flat on the first try. You can repeat the whole procedure by peeling and leveling it. After you have done everything perfectly, expel air bubbles with a spatula, smooth out all the wrinkles, even the smallest ones. Do everything very slowly so as not to spoil anything. Move from the center to the edges.

After the manipulations done, glue may come out around the edges, it should be carefully removed with a sponge. After that, the film should be sealed around the perimeter with adhesive tape. That's it, you have completely attached the background to the aquarium. Then decorate it and launch your favorite fish.

How to stick a photophone with adhesive tape?

This is the easiest and fastest way. For this case you will need:

• scissors;
• adhesive tape;
• background.

Note that the picture should be several centimeters larger on all sides of the glass. Nothing will happen if you purchase a larger background. At home, you can always cut it with scissors to the desired size.

So, attach the background to the aquarium, align it to the top corner. Next, secure the top of the film with tape. Nowsmooth it out gently. Then stick the tape on the bottom and sides. This method has a drawback. In the space between the background and the wall of the aquarium, droplets of water may accidentally appear. In humid places, the picture will adhere more strongly. As a result, the visual perception of the entire aquarium deteriorates.

Embossed background. Description and Features

There is also a relief background. Manufacturers claim that it is made from non-toxic materials. There are different options for attaching it to the aquarium. In the first case, silicone glue is used, which is usually included in the kit. In the second, fastening occurs by pressing it with stones or soil to the back wall.

This background is quite expensive, it is quite difficult to install it. And the finished result is not always pleasing to the eye. It happens that such a background looks stiff.

Small conclusion

Now you know how to glue the background on the aquarium. We examined what are the design options for the back wall of a home reservoir, how best to mount the film. We hope that our recommendations will help you.