How to set up a hair clipper: instructions, features, tips

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

Today, many men prefer to cut their own hair. This is not only very convenient, but also profitable, since money is saved significantly.

Unfortunately, not everyone knows how to set up the hair clipper correctly, and the quality of work and the duration of operation of this device will largely depend on this. We offer several recommendations for setting up machines.

Why is it necessary to adjust the machine?

At first glance, it may seem that the machine is a completely ordinary and simple device that does not need to be configured, but can be used immediately. But this is far from true. It is very important to take care of your device, and then it will last for many years.

Over time, the knives of some appliances may begin to cause some inconvenience when using,leave hair uncut, bite it and even get electric shock. In this case, it is imperative to service the device and adjust the blades. Let's take a look at how to set up your hair clipper next.

Blade adjustment

Tuning the blades of this device is a very important procedure. It must be performed when the machine starts to work poorly. She may begin to cut her hair sloppily or bite her hair.

In order to adjust the blades of the clipper, be sure to clean it from dust and dirt. Perhaps they have hair left on them, they must also be removed by all means. How to set up a hair clipper? To do this, you need a regular screwdriver. Use it to unscrew the screws that secure the blades to the body of the machine.

It is worth noting that different manufacturers place these mounts in completely different places, but the circuit itself does not change. After you managed to do it once, you don’t have to worry anymore, because then everything will be much easier.

Initially, you need to loosen the bolts on the case and unscrew the two screws. The end of the blade should be moved to the edge of the top. This position must be fixed and set correctly. It is this procedure that will allow you to get an excellent haircut and beard.

There is another easier way to set up a hair clipper without focusing on angles. Everything happens in the same way, but in this case, the middle of the upper blade will serve as a mark. This is how you set up morebudget cars.

If the device has been used long enough, then most likely it will be necessary to lubricate all the elements of this device so that they can last as long as possible. Usually the blades are exposed once, and after that the machine works perfectly for a long time. It is important to know that after each use it should be wiped well from dirt and hair residue. And most importantly, make sure that the device does not come into contact with water, otherwise it may break down.

The adjustment scheme for all devices is the same. Let's take a look at how to set up the most popular brands of hair clippers.

Vitek hair clippers

Vitek is considered a very high quality clipper. With it, you can safely cut your hair to a length of twelve mm, as well as to the smallest - three mm. The main plus is that the blades are made of steel, and, as you know, this is an excellent material. The machine has a low noise level, also quiet vibration. Many people do not like it when it is too noisy, so this option is perfect for them. The case is made of high quality materials, which allows you to save the machine from shock and other damage. In this case, the machine will serve for a long time.

Setting features

Let's take a look at how to set up a Vitek hair clipper. It will be better if there is a small gap between the upper and lower knife. In this case, the operation of the machine itself will improve, and it will not bitehair and ruin your hair. It is also worth considering that it is not necessary to turn the bolts much, because the thread can break. And if this happens, then there will be no point in setting up the device.

Car model Scarlett SC-1263

This brand is quite popular among users. This machine has excellent quality and inexpensive price.

Its power is 13 watts. The length of the wire is about two meters, and it works from the network. The model is the most common, has four nozzles in the kit. Includes scissors, comb, knife cover, oiler and storage case. Battery operated and charges within seven hours. The blades are very high quality and durable. It also has seven length steps. Scarlett is a great choice for a category of people who do not consider it necessary to spend money on hairdressing services, but prefer to do their own haircut at home.

How to set up the Scarlet SC-1263 hair clipper?

Such models are usually adjusted without removing the blade. It can be done by simply tightening the bolts. You may also need to lubricate the used elements of the device. Engine oil (development) is best suited for this procedure.

The main thing to remember is that clippers of this particular model require constant adjustment, but the whole setup scheme is somewhat simpler than that of other models. Therefore, proper maintenance of the equipment will not seem like such a big problem.

Polaris hair clipper

Comfortable, high-quality and inexpensive model. It has a hanging loop for convenient storage. How to set up a Polaris hair clipper? The procedure is the same as for other models.

Proper car care

For long-term operation of the machine, some important rules should be followed:

1. Before setting up, be sure to look at the instructions and study in detail all the information written in it. If this is not done, you can start doing everything wrong and aggravate the condition of the device.
2. After each haircut, the machine must be cleaned well. As a rule, this is necessary for hygiene purposes and so that the hair that remains after the procedure does not clog the motor and it does not overheat. If you do not take this seriously, then the machine will simply burn out, and in this case you should not count on a guarantee. Based on this, you should clean the blades as best as possible with a special brush.
3. Be sure to oil your blades and do it often. A large percentage of people do not follow this rule, because they consider it a waste of time, and then complain that the machine does not do its job well. The best option is to lubricate after each haircut. Immediately after this, you need to turn on the machine so that the oil evenly lubricates all the elements.
4. Never lubricate with otherssubstances other than the special lubricant included in the kit. If the lubrication has run out, you can use engine oil.
5. Also a necessary condition is the sharpening of the blades. You can do this once every three months.
6. The car should not be left in a room where the temperature is about zero degrees. It must be kept at room temperature.
7. If the car is charging with a battery, then first you need to discharge it to the end, and then charge it for about eight hours.
8. Even if no one uses the machine for a long time, the battery still needs to be charged once every six months.
9. Never adjust blades by force. If it is not possible to put the blades in the desired position the first time, then we can assume that there is some kind of problem. Therefore, initially you need to follow the recommendations and read the instructions for use again. Many models come with a special key for this procedure. If there is no such option, you can use a screwdriver.
10. It may happen that the adjustment does not help at all, and the device continues to malfunction. In this case, you can buy new knives. They are much cheaper than a new machine. It is worth noting that many come with special blades and nozzles.

Conclusion

So we looked at how to set up the Scarlet, VITEK and Polaris hair clippers.

These models are great for cutting adults and even children, as they have a very quiet vibration level, and the child will notafraid of this device. The main plus is the weight of the devices. They weigh about 200 grams, and therefore the hand does not get tired at all. Since the manufacturer has created a plastic case, it is highly recommended to hold the machine firmly in your hands and not drop it.

The most important thing is, of course, to keep an eye on your typewriter and clean and care for it in time. If you ignore all the rules, it can break at any time, and then you will have to spend money on a new device again. To avoid this, it is better to do everything right at once and act according to the established recommendations, and then the machine will work for many years.