Remedy for blockages in pipes: "Pothan", "Mole", "Tiret Turbo" - which is better?

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

Each of us at least once in our lives, but faced with such a problem as a blockage in the pipe. This case is rather unpleasant and requires urgent action, unless, of course, you are a fan of dirty dishes or the inability to take a shower. A huge amount of advertising on TV broadcasts about the effectiveness of many tools for almost instantly eliminating blockages. Let's see if they are really so good and how else you can eliminate the blockage.

How to tell if there is a blockage?

The first and most important sign of blockage is a decrease in the rate of outflow of water from the bathroom / sink / toilet bowl, etc. If the plunger does not help, it means that not an air bubble is stuck in the pipe, but fat, food debris, hair, etc. This requires urgent intervention, as turning on the water can cause a real flood.

If, as such, there is no decrease in the rate of water draining, but there is an unpleasant smell from the drain, then this is also a sign of blockage, but not yet strong. It is worth taking measures immediately so as not to aggravate the situation by taking advantage of folk remedies.products or chemical gels designed to prevent blockages.

A sign of blockage is water in the underlying drains, such as a bathtub, when the water in the sink is turned on. The same effect can occur when draining water from a washing machine. In this situation, a remedy for blockages in the pipes can also help. But which one to choose? Let's find out.

What is the basis of any remedy for clogged pipes?

What substances help clear blockages? The main component that is included in any sewer pipe product, as well as in folk recipes, is acid or alkali. Alkali dissolves fatty contaminants well, and acid dissolves soap, hair, threads, etc. Based on the properties, it becomes clear that alkaline ones are usually used for the kitchen, and acidic ones for the bathroom.

Clogged pipes sold in different forms:

• gel (it is more economical as a small amount is evenly distributed over the surface of the pipe and eliminates contamination without requiring even half a container of gel);
• powder (it must be poured into the drain hole and poured with the required amount of water; it is important not to overdo it, and also rinse the powder thoroughly with water, otherwise it may begin to corrode the surface of the tub / sink and pipe, as it is more concentrated than the other 2 type);
• liquid (it is poured into the pipe in large quantities, diluted or not diluted with water, it is also important to rinse thoroughly so that there are no problems).

Thanks to advertising and the experience of generations, we are withoutlabor we can name the most famous names: "Tiret Turbo", "Mole" and "Pothan".

Mole

Liquid "Mole" is one of the oldest funds in terms of age. It removes blockages well, but few people know that it is only suitable for metal pipes, and plastic pipes can be ruined due to the alkaline environment. Another disadvantage of "Mole" is that it has a chemical unpleasant odor, so after pouring the product into the pipe it is better to leave the room, and after removing the blockage, ventilate it.

Tiret Turbo

This is a remedy that can be found in any store. It is very well advertised, and for good reason. In terms of efficiency, "Tiret" is not inferior to any remedy for blockages, and even surpasses them, as it is suitable for all types of pipes and does not have a pronounced smell. "Tiret" is a gel in consistency and is divided into several categories: for the prevention of blockages, for the elimination of blockages, for the elimination of complex blockages. It says on the package that it works for 5 minutes. In fact, the duration of action may differ depending on the complexity of the blockage in the pipe, because the greater the layer of accumulated debris, the longer the gel will have to dissolve it.

When polling consumers on the question of which tool they use more often to clean water pipes, the majority answers: "Tiret". Reviews about him on the Internet and other sources are mostly positive. It removes blockages effectively and quickly, disinfects, eliminates unpleasant odors,prevents mold.

Pothan

"Potkhan" is a pipe cleaning agent, the price of which exceeds the prices of all other products (we will discuss this below). It is produced in the form of a powder, has an antibacterial effect and quickly dissolves fatty and other types of blockages, so it is recognized as the best remedy for them. "Potkhan" can be used both for metal pipes and for plastic ones. Its biggest drawback is its strong pungent odor. Therefore, you can use it only in accordance with the instructions, as well as use protective equipment (mask and gloves).

There are others

If you go into the store, you will be surprised by the variety of pipe cleaners. In addition to the above, Domestos, Mister Muskul, Sanfor, etc. are popular. They are often similar in composition or form of release to those considered, and someone prefers them. But everyone chooses the best remedy for blockage in pipes for himself.

Prices

Clog prices vary greatly. So, Tiret Turbo, depending on the type of gel and the store's margin, can cost from 200 to 400 rubles. "Mole" is cheaper - about 100 rubles. for 1 liter of funds. "Potkhan", a pipe cleaner, the price of which is quite high, will cost about 500 rubles. for 600 g of powder, but is less common on the shelves than the same Tiret. The rest of the funds have approximately the same prices, but their cost rarely exceeds 500 rubles.

Safety measures

Drain cleaner is very toxic, whatever it is, so you need to take precautions so as not to harm your he alth and downpipes. First, you need to use gloves and a mask. Gloves can be the most common, rubber, sold in any store. And the mask can be made independently from fabric, the main thing is that it protects from harmful fumes and smells. In case of skin contact, be sure to wash the area with soap and water, if irritation occurs, you can drink antihistamines, but it is worth visiting a dermatologist to avoid a possible chemical burn. In case of contact with eyes, do the same - rinse with water and seek medical advice.

It is equally important to follow the rules for using a particular tool. So, it is better not to pour the agent for metal pipes into plastic ones, as it can damage them and the pipes will have to be changed, and not cleared of blockages.

How else can you clear blockage

If you do not have the opportunity to quickly run to the store or you are not a supporter of chemicals, or maybe for other reasons you do not want to resort to the help of "Mole", "Tiret" or another means, try to mechanically clean the pipes or use folk recipes.

The easiest way at first glance is to use a plunger. It is a bowl-shaped rubber nozzle on a woodenor plastic handle and serves to bleed air from the pipeline, which pushes the contamination through the pipe and eliminates it. But a plunger is not always able to get rid of pollution, since air cannot push through strong blockages.

If you call a plumber, he will not pour special products into the pipes, but will either blow the pipe or disassemble it and clean it with a hose or a hook, pulling out dirt. Purging is carried out by special equipment, similar to a vacuum cleaner. If you can disassemble the pipe and clean it yourself (unless, of course, you are sure that you will assemble it correctly later), then you cannot blow it out on your own by any means, since you can damage the pipes not only in the apartment, but also common ones. It's better to pay for plumbing than for repairs.

Folk recipes

There are a few folk remedies that are not as strong as "Pothan" or "Tiret", for example, but can also help if your pipes are clogged:

1. If the cause of the blockage is frozen fat, then it must be melted with hot water. To do this, just open the hot water and let it run for 5-10 minutes, the main thing is to make sure that it flows and does not cause a flood. Boiling water should not be poured into the pipes, as it can damage them.
2. For metal pipes, you can try using a solution of caustic soda (1 tablespoon per 1 liter of hot water). The mixture is poured for several hours, and then washed off with hot water. Important: when working with soda, wear gloves and make sure that it does not get onenamelled surfaces, as it can corrode them.
3. In the fight against blockages, you can use ordinary baking soda paired with vinegar. Everyone knows that when baking soda interacts with vinegar, a large amount of foam is released, which means that a chemical reaction occurs. Pour a glass of soda into the drain, pour a glass of vinegar on top and let stand for 30-60 minutes. After that, rinse with hot water. It is important to ensure that the foam does not come out of the drain, otherwise it may damage the surface of the enameled bathtub or sink.

Folk methods should be resorted to only in case of a weak blockage or for prevention. Strong pollution with ordinary soda is very difficult to remove, and in some cases it can only make it worse.

So, it is difficult to unequivocally say which of all means is better. It all depends on the type of pipes, the type of blockage, and how much you are willing to pay for it.