How to load the stapler with staples

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

The first paper stapler was made in the 18th century for the French Emperor Louis XV. Each brace was marked with the sign of the royal court.

In 1867, D. McGill received a patent for a press that allowed sheets to be fastened using brass fixtures.

His device became the basis for modern staplers. Modern devices are smaller and lighter. They are much more convenient to use.

Types of staplers

In 1997, the stapleless stapler was invented. This stapler staples paper into small strips cut from paper. Therefore, its owner does not have a question about how to charge the stapler. There are three types of staplers: standard, mini and construction.

They are equipped with a manual or electric drive. A stationery stapler is used to staple paper sheets with metal staples. It is used to make brochures and notebooks. The conventional stapler staples up to 50 sheets. One pack contains 20 plates of 50 staples. When you press the handle of the device, the spring that is inside is stretched and unclenched, driving in the bracket. She goes throughpaper and falls on the deflecting plate, which bends its ends. Some models of staplers fold the staples in two different ways: inward or outward. In the second case, the bracket is easily pulled out. This stitching method is used to temporarily secure the sheets. At the back of some models there is a protrusion for extracting the staples. They are also equipped with a mechanical amplifier. The best material for a stapler is plastic-coated metal. To prevent the device from scratching the surface of the table, plastic or rubber pads are put on its bottom.

The construction stapler is used for upholstery of furniture and walls. It has a high rate of fire and fires up to 60 hits per minute.

Stapler cartridges are also available in some models of copiers and printers.

How to load the stapler with staples?

Before filling the stapler, you need to make sure that the selected staples fit it in size. Manufacturers indicate their size on the packaging of the device. For convenience, they are marked with numbers. How to charge the stapler? Most models open from the top. In some cases, before opening, you need to move the side fasteners. Other staplers open at the push of a button. The opening method is indicated in the user manual.

How to load the stapler with staples? They are placed in the compartment so that their ends fall into the slots. You can use tweezers to refill the mini stapler. Then the stapler is closed. In this case, a characteristic click should be heard. The stapler is checked by fastening a pack of sheets of paper. If the staples bend and get stuckinside, you need to open the stapler and align their rows.

Construction stapler

How to charge the stapler? First you need to make sure that the stapler is locked. Then you need to find the button that opens the tray. It is usually located on the back of the device. How to charge the stapler? Remove the staple holder from the device. The remaining staples are discarded. The stapler is cleaned of dust and debris. Then it is turned over and the staples are inserted upside down.