How to make a hanging lampshade with your own hands?

2024 Author: Priscilla Miln | [email protected]. Last modified: 2023-12-16 00:21

A fairly wide range of lamps in stores does not suit everyone. Sometimes a truly original thing suitable for interior design can be done only on your own. Let's look at how to make a spectacular hanging lampshade with your own hands.

Materials

To make a lampshade, you will need a strong cotton braid with a dense weave, which will act as a winding for the frame. This solution will allow you to prepare the base, on which the outer trim of the product will subsequently be sewn. Alternatively, self-adhesive paper tape can be used. But only if the fabric that will fit the frame is not sewn on.

You will have to find the frame itself or prepare individual elements for its manufacture. You may also need enamel to paint the metal parts of the product. In conclusion, you will have to take care of finding suitable mounts.

Frame

To make a reliable and attractive fabric hanging lampshade, you need the appropriateframe. To make it, it is enough to find several rings of various diameters, as well as a strong metal wire, which will serve as racks to maintain the shape of the product.

If you connect rings of the same diameter with even racks, you get a cylindrical hanging lampshade. To make a product in the form of an inverted bowl, the upper ring must be smaller. In this case, the racks can be left flat or bent inward.

Fabric

When choosing the right fabric for making a lampshade, you should pay attention to several important points. To begin with, you should look through the thickness of the material at the lamp and evaluate how well it transmits light.

If it is necessary to make a hanging lampshade, in which the contours of the structure will be invisible while the lamp is lit, it is recommended to use not only external decorative material, but also fabric to create a dense lining.

Fabrics of different colors cast light differently. For example, yellow and red material gives a warm reflection, green and blue - cold.

Fastening

As a means to fix the lamp, it is enough to use fittings from the old product. Most often, a hanging lampshade is attached to the base of the lighting element using a special ring with spacers. As an option, the design can provide clamps that will serve as the basis for holding a hand-made decorative item.

How to make a fabric hanging lampshade?

It is extremely convenient to do the work with a pre-prepared frame. You can make it yourself, or use any suitable design from an old lamp. The work is carried out in several successive stages:

• The outer side of the frame is wrapped in a single piece of thick paper or cardboard to get an idea of the future shape of the finishing material.
• The pattern prepared for further work is carefully removed from the structure and laid out on the table.
• The finished sketch is transferred to the fabric, which is cut out with allowances of 1 cm for the seam and about 5-6 cm for the hem along the edges of the frame.

The materials from which the hanging lampshade will be made with your own hands depends only on the imagination of the master. You can use either one fabric base or several pieces of material of various thicknesses, colors, textures, which will allow you to create a more complex, original pattern.

In closing

As you can see, it is not so difficult to engage in such creativity. The main thing is that after the first successful attempts, most home craftsmen find it difficult to stop, and any standard lampshade is regarded as something ordinary and unworthy of attention.